EP-1000 expansion agent powder EP-1000

EP-1000膨脹劑

一、Product introduction 產品簡介

EP-1000 expansion agent has excellent performance, good micro-expansion effect, uniform and dense pores, does not affect the strength of the system, low dosage, and high cost performance. It is a non-toxic, odorless, green and environmentally friendly additive product.

After adding this product to dry mortar, concrete and other systems, it can form uniform and dense tiny pores, so that the system produces micro-expansion in the plastic stage, and maintains the micro-expansion in the hardening stage. Achieve the functions of compensating for concrete shrinkage, compacting concrete, and improving concrete impermeability.

    EP-1000膨脹劑性能優異，具有微膨脹效果佳、氣孔均勻致密、不影響體系強度、摻量低、性價比高等優點，是一種無毒、無臭、綠色環保的添加劑產品。在干粉砂漿、混凝土等體系中加入此產品后能形成均勻致密的微小氣孔，使體系在塑性階段產生微膨脹，硬化階段保持微膨脹，達到補償混凝土干縮、密實混凝土、提高混凝土抗滲性等作用。

二、Scope of application 適用范圍

     This product is often added to various cement-based grouting, mortar and concrete systems together with other additives. It is especially suitable for high-grade products that require plasticity and early expansion, such as grouting agents (materials) and various grouting materials.

   本產品多與其他添加劑一起添加到各類水泥基壓漿、砂漿和混凝土體系，特別適用對塑性和早期膨脹有要求的高等級產品，如壓漿劑（料）、各類灌漿材料等。

三、Main performance  主要指標

Product application examples 產品應用示例

四、Precautions for use  注意事項

1. The recommended dosage of this product is 0.20-0.50% for grouting material system and 0.02-0.05% for grouting material system. It can meet the requirements of different systems by increasing the dosage, and carry out a trial mix test before use to find the best dosage.
本產品推薦摻量為壓漿材料體系0.20-0.50%，灌漿材料體系0.02-0.05%，可通過提高摻量滿足不同體系要求，使用前進行試配試驗，以求最佳摻量。

2. When using this product, the measurement must be accurate, and each mixture must be stirred evenly.
使用本產品時，必須計量準確，各拌合物需攪拌均勻。

3. This product is thermoplastic, so it should be stored in a high temperature environment to avoid pressure, otherwise it will easily cause agglomeration.
本產品具有熱塑性，在高溫環境下存儲應避免受壓，否則易引起結塊。

五、Packaging and storage 包裝與貯存

1、This product is powder, packed in paper-plastic bags, 25kg/bag.
     本產品為粉劑，紙塑袋包裝，25kg/包。
   
2.  This product should be sealed and stored in time after opening the bag and using it.
本產品開袋使用后需及時密封保存。

3.  This product should be sealed and stored in time after opening the bag and using it.
應置于陰涼干燥處儲存，避免陽光直射、雨淋。
    
4.  The warranty period is 12 months, and the overdue products can be used only after they are tested and verified.
質保期12個月，超期產品經試驗驗證合格后方可繼續使用。

六、Technical Support  技術支持

In the preparation of various mixtures of this product, the company provides free professional technical consulting services and provides users with formula system optimization services.
本產品在各類拌合物配制中，公司免費提供專業技術咨詢服務、提供各用戶配方體系優化服務。